Description
Rugged and accurate.
Looking for a front sight that is machined from a single piece of solid steel (or brass) barstock, is virtually indestructible, no snag, bold and visible for quick accurate shooting? Look no further... Check out our Skinner Sights BEAR BUSTER line of front sights. Intended to be a direct replacement for the ramp/sight combo on your Rifle.
The two screw version is designed for new production MARLIN RIFLES. (Since 2000) Fits Guns with 1" C-C Hole Spacing (6-48 Screw size)
The SINGLE SCREW version is for .700" SPACED RIFLES and MODEL 1894's (6-48 Screw size). Designed for use with the Marlins that have .700" C-C screw hole ramps and rifles using a single screw. Uses a single screw but is very strong. Sight base covers the forward screw hole.
We commonly use the single screw on Henry models (including the X model) that use a single screw attachment .
BLADE IS .080" WIDE
Solid Brass available in either screw option.
Screws and wrench provided.
(Screws may be slightly "over long" for your gun. We want you to have the most thread depth available. These ship with average "Guide Gun" length screws. If your holes are shallower, slight trimming of the screws may be necessary.)
Note: This sight also works great on Shotguns, Handguns, Bolt guns, etc.
Height .500" or .560" / 1.375" OAL / Solid one-Piece construction.
These sights are so strong, no "wings" necessary! Machined from Solid STEEL or Brass Bar stock. Can be "Trimmed" to height if needed.
NOTE: No promises here but, the .560" tall sight (top of barrel to top of sight) GENERALLY works with our SKINNER "EXPRESS" and SKINNER "ALASKAN" rear sights on the Marlin GUIDE GUNS, including the current manufacture by Ruger.
No returns for wrong height. It is what it is. .500" or .560" tall and can be trimmed as needed.
NOTE: No promises here but, the .560" tall sight (top of barrel to top of sight) GENERALLY works with our SKINNER "EXPRESS" and SKINNER "ALASKAN" rear sights on the Marlin GUIDE GUNS, including the current manufacture by Ruger.
No returns for wrong height. It is what it is. .500" or .560" tall and can be trimmed as needed.
Tab title
Rugged and accurate.
Looking for a front sight that is machined from a single piece of solid steel (or brass) barstock, is virtually indestructible, no snag, bold and visible for quick accurate shooting? Look no further... Check out our Skinner Sights BEAR BUSTER line of front sights. Intended to be a direct replacement for the ramp/sight combo on your Rifle.
The two screw version is designed for new production MARLIN RIFLES. (Since 2000) Fits Guns with 1" C-C Hole Spacing (6-48 Screw size)
The SINGLE SCREW version is for .700" SPACED RIFLES and MODEL 1894's (6-48 Screw size). Designed for use with the Marlins that have .700" C-C screw hole ramps and rifles using a single screw. Uses a single screw but is very strong. Sight base covers the forward screw hole.
We commonly use the single screw on Henry models (including the X model) that use a single screw attachment .
BLADE IS .080" WIDE
Solid Brass available in either screw option.
Screws and wrench provided.
(Screws may be slightly "over long" for your gun. We want you to have the most thread depth available. These ship with average "Guide Gun" length screws. If your holes are shallower, slight trimming of the screws may be necessary.)
Note: This sight also works great on Shotguns, Handguns, Bolt guns, etc.
Height .500" or .560" / 1.375" OAL / Solid one-Piece construction.
These sights are so strong, no "wings" necessary! Machined from Solid STEEL or Brass Bar stock. Can be "Trimmed" to height if needed.
NOTE: No promises here but, the .560" tall sight (top of barrel to top of sight) GENERALLY works with our SKINNER "EXPRESS" and SKINNER "ALASKAN" rear sights on the Marlin GUIDE GUNS, including the current manufacture by Ruger.
No returns for wrong height. It is what it is. .500" or .560" tall and can be trimmed as needed.
NOTE: No promises here but, the .560" tall sight (top of barrel to top of sight) GENERALLY works with our SKINNER "EXPRESS" and SKINNER "ALASKAN" rear sights on the Marlin GUIDE GUNS, including the current manufacture by Ruger.
No returns for wrong height. It is what it is. .500" or .560" tall and can be trimmed as needed.